Termékek éjszakai látógép (166)

Alaia Serramenti srl is an absolute point of reference in the area also for what concerns the design and production of safety doors and windows, such as iron shutters and armored Neapolitan shutters. These are two extremely effective, reliable and functional solutions to best protect every type of space, from domestic to commercial, to studios and professional environments. Thanks to our resistant and robust iron shutters you will always be able to sleep soundly, because they will prevent all intruders from accessing your spaces. And if you want an even greater level of protection, choose our armored, burglar-proof Neapolitan doors.

Professional counter-top cardboard shredder. Mouth width 300 mm x height 12 mm - Industrial cardboard shredders, of the FP299 ED12 series, are professional machines designed for all companies that have to manage used cartons and packaging within their production cycle. Used cartons can be conveniently cut and transformed, from inconvenient waste destined for disposal, to practical material for shockproof and filler packaging. With this cardboard shredder model, elastic nets can be obtained. All models are equipped with high efficiency heat-hardened steel blades that resist the passage of small pieces of metal and staples. In any case, whenever possible, it is advisable to remove the staples before chop the cardboard, to preserve the cutting knives as much as possible and also to avoid finding metal pieces inside the packaging material that is created. It is also possible to shred CDs, floppy disks and 86x54 mm PVC cards (standard credit card format). Cutting mouth width (mm):300 Cutting mouth height (mm):12 Type of cuts:Packing net Cutting capacity (m³/hour):2

PROFESSIONAL GLUE GUNS SERIES M The professional glue guns series M are suitable for assembling, gluing, repairs on wood, plastic, cardboard, paper, cloth, metal pre-heated, rubber and leather. Installation and repair of tiles and porcelain. The M 812 model is recommended for intensive industrial use and is also available in the motorized M 812MG version with automatic continuous extrusion glue advancement device. FEATURES - Max. extrusion glue: 800 - 1200 - 1500 -1800 g/h approx. - Max. operating temperature: 190-220-230°C - Adjustment of the temperature and the extrusion capacity (excluding mod. M 195) - Support bracket and interchangeable, insulated and antidrop nozzle - Packaging: In a sturdy plastic carrying case complete with spare nozzle - Uses 12 mm diameter glue sticks, length 200 mm. Example model:M 3350 Power:300W Temperature:120-230 °C Max output:1.500 g/h

Series of rugged and professional compressors with dry mechanical. They work without the need for lubricating oil and are equipped with double control manometer for tank pressure and air output, manual pressure regulator of outlet air and ON-OFF button. The FPGE dry compressors are developed exclusively for professional applications and deliver high reliability and continuous operation. Thanks to the self-lubricating mechanical, patented worldwide, FPGE compressors provide approximately up to 5000 hours of use without maintenance, guaranteed even below freezing. Application-oriented use The design of FPGE compressors has been conceptualized keeping in mind principally the work requirements of the user. Frequently, work conditions can be difficult and less than optimal. The ease in which these compressors can be moved and transported is a fundamental product development feature for FPGE. Example model:FPB 110/05 Power:0,75 Kw - 1,00 Hp RPM:2800 rpm Tank:5 lt Max pressure:8 bar Air intake:110 L/min Air yield:60 L/min Noise:72 dB (A)

The DSL professional inkjet marker is suitable for marking on porous surfaces (cartons, cartons). Thanks to the external ink tank, it is possible to position the marker on automatic lines and save considerably on consumables and cartridge replacement times. The cartridges contain 420 ml. The cost of printing is about 5 times lower than the other FPA2 series markers. It allows to print alphanumeric texts, logos, date / time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12,7 mm. The minimum printing height is about 5,4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters. The cartridges are very durable, have a duration of tens of thousands of markings and do not require maintenance. The marker is however equipped with an automatic nozzle cleaning system. Thanks to the SD card (included in the package) you can save up to 999 messages. Resolution:600x300 dpi based on resolution and printing speed Print engine:Hewlett-Packard Thermal Ink Jet Technology Print speed:72 m/min at 300 dpi, horizontal resolution Maximum printing height:12,7 mm (1 row) Minimum printing height:2,7 mm (on several lines) Print distance:6 mm recommended Printable elements:alphanumeric writings, logos, date / time, codes, counter, lot and barcode

Series of rugged and professional compressors with dry mechanical. They work without the need for lubricating oil and are equipped with double control manometer for tank pressure and air output, manual pressure regulator of outlet air and ON-OFF button. The FPGE dry compressors are developed exclusively for professional applications and deliver high reliability and continuous operation. Thanks to the self-lubricating mechanical, worldwide patented, FPGE compressors provide approximately up to 5000 hours of use without maintenance, guaranteed even below freezing. Application-oriented use The design of FPGE compressors has been conceptualized keeping in mind principally the work requirements of the user. Frequently, work conditions can be difficult and less than optimal. The ease in which these compressors can be moved and transported is a fundamental product development feature for FPGE. Example model:FPC 330/50 Power:2,2 Kw - 3,00 Hp RPM:1400 rpm Tank:50 lt Max pressure:10 bar Air intake:330 L/min Air yield:200 L/min Noise:80 dB (A)

Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with width of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm. The load varies mainly depending on the width of the plan.

The FG PX series is the next series of robust and professional stackers suitable for high utilization during the working day. In fact they have 3 hours autonomy. Characterized by high quality, are equipped with electric feed and lifting. High maneuverability: agile and easy to use, comes with butterfly rudder for traction control.The position of the wheels always within the width of the vehicle allows to handle goods in narrow spaces and corridors. Double protection carter in ABS, guarantees a simple and quick maintenance of the battery. Available models: FGPX 12/25 capacity 1200 Kg lifting height 2410 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/29 capacity 1200 Kg lifting height 2810 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/35 capacity 1200 Kg lifting height 3410 mm - standard battery 24V/85Ah from starter cars (lead-acid) FGPX 12/42 capacity 1200 Kg lifting height 4110 mm - GEL battery 24V/105Ah Example model:FGPX 12/29 Load (Q):1200 kg Lifting hieght (h3):2810 mm Advancement:electrical Advancement speed:5 km/h Lifting:electrical Lifting speed with load:0,12 m/s Descent speed with load:0,12 m/s Forks length (l):1150 mm Traction motor:0,7 kW Lifting motor:2,2 kW Standard battery:from starter cars (lead-acid) 24V 85Ah Battery type:from starter cars (lead-acid) Car

FPGS PRO MANUAL QUICK LIFT PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. The "Quick Lift" function allows you to lift loads quickly, thanks to the specific hydraulic pump. Two pump strokes allow you to lift loads up to 120 kg from the ground or three pump strokes for loads over 120 kg, compared to 5 pump strokes with a hand pallet truck equipped with a standard pump. Available in the following models: Pallet truck with forks mm 1150x525 with single roller Pallet truck with forks mm 1150x525 with double roller The FPGS PRO 2500 models are equipped with a double or single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings. Powder coating dried at a temperature of 250 °C to ensure maximum resistance to wear and atmospheric agents. Load:Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Fork width (e):mm. 150 Height min. forks (h13):mm. 85 Max Height forks (h3):mm. 115 Total length (l1):mm. 1550 Rudder height (h14):mm. 1160 Operator side wheels:diam. 200 x 45 mm Front wheels material:Polyurethane Load side rollers:diam. 82 x 60 mm Roller material:Polyurethane

FPGS PRO MANUAL PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. They are also characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip The FPGS PRO 2500 models are equipped with a double loading roller but on request they can also be equipped with a single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings. Example model:FPGS PRO 25/115 Load:Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Fork width (e):mm. 150 Height min. forks (h13):mm. 85 Max Height forks (h3):mm. 115 Total length (l1):mm. 1550 Rudder height (h14):mm. 1160 Front wheels material:Polyurethane Roller material:Polyurethane

ELECTRICAL LIFTERS FPRX with single column and fully electric (lifting and handling) The indicated price includes 1 24V/70Ah battery and relative battery charger The FPRX elevators are very high quality elevators, available with lifting from mm. 810 or 1525, and with capacity up to 1000 Kg. The FPRX models can be ordered in the following versions: - Standard starter car batteries (lead-acid) - Gel battery (guarantee longer life and longer recharge cycles) - PRO version with GEL battery (proportional control of the forks, ergonomic tiller) - PRO version with Li-ION battery (Meets all storage needs) WARNING: all forklifts are tested one by one, before being packed and shipped, in a professional way and are complete with CE certification. Example model:FPRX 10/09 ST Capacity:1000 Kg Lifting height:810 mm Avancement:electrical Lifting:electrical Translation speed:4,3 Km/h Forks lenght:1153 mm Total dimensions:1675x794 mm Engine power:0,35 Kw Battery type standard:from starter cars (lead-acid) 24V-70 Ah

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

Alaia Serramenti srl is at the forefront in the design and creation of tailor-made security grates, which can be customized as you see fit, so that these armored doors and windows are truly able to meet your needs. Solid and resistant, the security grates designed and produced in our factories in San Cipriano d'Aversa are the most suitable solution for effectively protecting yourself against intrusions and unwanted access, dissuading potential criminals from any break-in attempts. Our security grates best protect private homes, offices, professional studios and commercial spaces, but they also have a high aesthetic value. We offer you a wide range of models with different finishes that will give an extra touch of elegance and style to the environments where our windows and doors will be mounted. You can choose between security grates in a modern style or characterized by traditional lines: whatever your taste

PROFESSIONAL COMPLETELY ELECTRICAL LIFTERS SERIES FPLX PRO The price shown includes 1 traction battery 24V-225 Ah and high-frequency charger for traction battery 24V-225 Ah. The FPLX series is the next series of robust and professional stackers suitable for high utilization during the working day. In fact they have 6 hours autonomy. Characterized by high quality, are equipped with electric feed and lifting. High maneuverability: flexible and easy to use, the new model has a lateral dimensions reduced to 800mm. The wheels position is always within the width of the vehicle allows to handle goods in narrow spaces and corridors. Quick and easy battery maintenance thanks to the new opening with ABS cover. Accurate control system and integrated with safety switch and battery status indicator. Ergonomic rudder.

Electric sewing machine for sacks model FPGK 350. This model is recommended for production up to 450 sacks per day. New model of the FPGK series designed for the seam of juta, paper, fabric, plastic and net bags. The front part of the stapler is made of metal while the handle is made of plastic. Given its features this electric sewing machine is suitable for farms, warehouses, post offices and food and chemical industries. It is a good solution for the closure of bags of any material and dimension due to the automatic feed. This light and handy machine is the fastest in its class. The standard model must be connected to the electric current of 220V. The maximum span passage is 10 mm. The material you can sew, if different from those listed must be low density (to avoid breaking of the needles). Sewing speed:10 m/min. Maximum thickness of the material:Up to 10 mm (low density materials) Maximum distance seam - bag border:mm 70 Stitch length:mm 6 TRANSPORT:Reciprocating Point:Chain Cutter:Automatic

Sturdy and professional roll holder suitable for the unwinding of heavy plastic reels film made of polyethylene. Load 100 Kg. Very robust reel holder, made of painted tubular steel and equipped with wheels with brake, it supports rolls with a weight of up to 100 kg and allows an operator to carry them out safely. The reel holders are made with the reel axis diameter 60 mm and length up to 2200 mm, very simple to rotate as it is mounted on ball bearings and equipped with cones for locking the reels. Depending on the presence or absence of the brake, the total width of the roll holder is approximately 200/300 mm wider than the useful width. The reel holder axis can be "idle" or "with brake". Reel holder axis:diameter 60 mm mounted on ball bearings Useful width:can be made to order from 1000 to 2200 mm Load:100 Kg Dimensions:depth 600 x height 800 mm